Änderungen an Schritt Nr. 5
Bearbeitet von Austin Blakely –
Bearbeitung genehmigt von Austin Blakely
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] There will be little side clamps on the edges of the slot so open those up first. |
|---|---|
| - | [* icon_note] It is recommended taking your time on this part. Do not be scared to open up the other RAM slots so you can see what it should look like when the RAM stick is in securely. If you open up the slots of the RAM already in, all you have to do is press the RAM back down in the same position in order for the slot to close securely once again. |
| - | [* black] Position the RAM correctly, and slowly slide it into the slot. You do have to put a bit of pressure in order to fully close the side slots once again, because the clamps have to lock-on to the sides of the RAM stick. You will be able to tell when it is in, and whether it is loose or not by a small clicking sound. |
| + | [* red] Open the side clamps on the edges of the slot you plan to install RAM in. |
| + | [* icon_note] It is recommended that you take your time on this part. Do not be scared to open up the other RAM slots so you can see what it should look like when the RAM stick is in securely. If you open up the slots of the RAM already in, all you have to do is press the RAM back down in the same position in order for the slot to close securely once again. |
| + | [* black] Position the RAM and slowly slide it into the slot. Push it firmly into the slot until it is secure, then close the side clamps around it. |
| + | [* icon_note] There should be a small click as the chip engages. |