Änderungen an Schritt Nr. 3
Bearbeitet von Logan Wake –
Bearbeitung genehmigt von Logan Wake
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Once the bottom panel is removed, remove the screws necessary using the Tri-point Y000 Screwdriver. Only three of the circled screws should be holding the radiator. |
|---|---|
| - | [* black] Use the ESD Safe Tweezers Blunt Nose tool to remove the radiator, revealing the main board |
| + | [* red] Once the bottom panel is removed, remove three 5mm Phillips #J000 screws using the Tri-point Y000 Screwdriver. Only three of the circled screws should be holding the radiator. |
| + | [* icon_note] Only three of the circled screws should be holding the radiator |
| + | [* black] Remove the radiator revealing the main board |