Änderungen an Schritt Nr. 2
Bearbeitet von Jack Benfeito –
Bearbeitung genehmigt von Jack Benfeito
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Flip the device so that the back plate of the laptop is up. | |
| - | [* black] Remove the base enclosure screws carefully using the opening tool with the PH0 bit. You might have to remove any rubber straps attached at the bottom of the device. |
| + | [* black] Remove the 4 base enclosure screws (6 mm) carefully using the opening tool with the PH0 bit. You might have to remove any rubber straps attached at the bottom of the device. |
| [* black] Pry off the back cover with the spudger tool. |