Änderungen an Schritt Nr. 5
Schritt-Zeilen
| + | [title] Removing the Motor from the Housing |
|---|---|
| + | [* black] Turn the motor container on its side, with the wires pointing up. |
| + | [* black] Unscrew the 3 screws attaching the motor to the housing. |
| + | [* black] Take the yellow wire out of the screw. |
| + | [* black] Use a wrench to unscrew the bolt on the inside of the motor unit. |
| + | [* icon_note] If rust has accumulated on the motor shaft, you may wish to use sandpaper to remove it to make the motor easier to remove. |
| + | [* black] Firmly grasp the motor from the side where the screws were previously located and pull to remove it. |
| + | [* icon_note] The white label on the side of the motor contains the model number of the blower motor which you may use as a reference when ordering a replacement, if necessary. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt
Bild 3
Kein vorheriges Bild
Hinzugefügt