Änderungen an Schritt Nr. 3
Bearbeitet von Sarah Westberg –
Bearbeitung genehmigt von Sarah Westberg
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Next, insert the 1/16th Allen Wrench into any of the two holes to pull out the back panel. |
|---|---|
| - | [* black] To do this, you insert the bent part of the wrench into the hole and leverage it out. Pull slowly until you are able to remove the panel with your hands. |
| + | [* red] Use a spudger to pry the back panel from the fan. |
| + | [* icon_note] If you can't pry between the seam of the panel and the slats, use the empty screw holes to lift the panel up with the pointed end of the spudger. |
| + | [* icon_caution] The battery pack is situated in the back panel of the fan, but it is also attached to the body. When removing it, avoid pulling or yanking on the back panel. |