Änderungen an Schritt Nr. 4
Bearbeitet von Kristen Gismondi –
Bearbeitung genehmigt von Kristen Gismondi
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Using a PH #2 screwdriver, remove the heating element front (10.9mm) screw. |
|---|---|
| - | [* black] Gently pull down the heating element from the front. The element wires should come out of their respective holes. |
| + | [* black] Remove the single 10.9 mm screw from the front of the heating element using a Phillips #2 screwdriver. |
| + | [* black] Gently pull down the heating element from the front. |
| + | [* icon_note] The element wires should come out of their respective holes. |
| [* black] Unhook the heating element from the rear hook. |