Änderungen an Schritt Nr. 2
Bearbeitet von Kristen Gismondi –
Bearbeitung genehmigt von Kristen Gismondi
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] |
|---|---|
| + | [* red] Remove the eight 12 mm screws securing the front cover using a Phillips #1 screwdriver. |
| [* black] Like the grille, pull from the top middle of the gray cover and slowly remove it from the speaker, like separating a sub roll. | |
| [* icon_caution] Be careful of the wires between the cover and the motherboard. If you pull the cover apart too far, you might damage these wires. |