/
Meine Werkbank

Erhalte schnellen Zugriff auf Anleitungen, Ersatzteile und Antworten für deine Geräte

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Registrieren
Anmelden

Änderungen an diesem Schritt

Bearbeitet von CJ Fagundo –

Bearbeitung genehmigt von CJ Fagundo

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Turn Off and Unplug the Keyboard Ensure the keyboard is completely powered off and disconnected from any power source before starting.
-[* black] Remove Screws (12 Phillips #1, 7.5mm) Use a screwdriver to remove all screws from the back panel. Some screws might be hidden under rubber feet or other parts, so be thorough. Keep track of the screws to make reassembly easier.
-[* black] Open the Case Gently lift the top panel of the keyboard to expose the internal components. Be careful of any ribbon cables or connectors attached to the panel—you may need to disconnect them to fully remove the top.
-[* black] Remove the Old Power Switch (2 Phillips 1 Size: 5.5 mm) Heat your soldering iron and use a desoldering braid or pump to remove the solder from the pins of the old switch. Once the solder is removed, gently pull the old switch out of its place.
+[* red] Use a screwdriver to remove all 12 #1 Phillips 7.5mm screws from the back panel. Some screws might be hidden under rubber feet or other parts, so be thorough. Keep track of the screws to make reassembly easier.
+[* black] Gently lift the top panel of the keyboard to expose the internal components.
+[* icon_caution] Be careful of any ribbon cables or connectors attached to the panel—you may need to disconnect them to fully remove the top.