Änderungen an Schritt Nr. 3
Bearbeitet von Luis Vazquez –
Bearbeitung genehmigt von Luis Vazquez
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Insert a spudger underneath the RAM chip. |
|---|---|
| - | [* black] With a second spudger, place it under the other side of the RAM chip. |
| - | [* black] Carefully lift one of the spudgers until the top part of the RAM chip is about a fourth of an inch away from the RAM chip bay. |
| + | [* black] Use a pry tool to pull back the white clip holding the RAM chip in place. |
| + | [* black] Once the pry tool has disengaged the clip from the RAM chip, keep the pry tool locked into place. |
| + | [* black] With a second pry tool,repeat the above process |
| + | [* black] After both pry tools have been locked in place, the RAM chip should pop out about 1/4 of a inch. |