Änderungen an Schritt Nr. 5
Bearbeitet von Alex Scott –
Bearbeitung genehmigt von David Hodson
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Identify the speakers on the underside of the speaker panel. Unplug the black and red wires connecting the speakers—on both ends of the panel—to a circuit board on the center of the panel by carefully pulling at the wires close to their connection with the circuit board. | |
| - | [* black] Using a Phillips screwdriver, remove the four screws—two screws per speaker—holding the speakers in place. |
| + | [* black] Using a Phillips screwdriver, remove the four screws—two screws per speaker— and the metal brackets holding the speakers in place. Place the screws and brackets in a secure place – they will be replaced later. |
| [* black] Remove the adhesive tape securing the speaker wires to the panel. |