Änderungen an Schritt Nr. 3
Bearbeitet von Evan Mayer –
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Lift the |
|---|---|
| - | [* black] Carefully remove the large ribbon-wire by pulling the wire where it connects with the |
| - | [* icon_note] In order to completely remove the |
| + | [* black] Lift the logic board from the casing. |
| + | [* black] Carefully remove the large ribbon-wire by pulling the wire where it connects with the logic board. |
| + | [* icon_note] In order to completely remove the logic board, you must desolder the small ribbon wire from the casing. |