Änderungen an Schritt Nr. 5
Bearbeitet von Giancarlo Villar –
Bearbeitung genehmigt von Giancarlo Villar
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Once the screws have been removed, lift the top half of the gun off. | |
| [* icon_note] Notice, the gray colored piece must be removed first in order for the larger half to be removed. | |
| [* black] Take care and try not to lose any smaller pieces as you open it up. | |
| [* black] 12 Philips head screws: Head Dia.= 4.3mm, Thread Pitch= 1mm, Screw Length= 8mm | |
| [* green] Locking tab for attachments. | |
| - | [* black] At this point, you are able to inspect the Nerf blaster's internals! |