Canon EOS 5D Mark II LCD Window Replacement Schritt Nr.2 Verlauf

-	[* black] a HAIR DRYER on a low heat would loosen the glue holding the existing screen in place.
-	[* black] The screen was well cracked but i did fancy putting anything blunt in there or risk the screen cracking in further toward the LCD screen. I used a SUCTION CUP from a sponge to grab the plastic cover. I applied pressure and pulled the suction cup away from the camera but as you can see from the image it wasn't budging.
+	[* black] Using a hairdryer or heat gun, heat up the lens for removal. This should not take longer than 30 seconds.
+	[* black] Now using a suction cup, I used a suction from a sponge,apply the suction cup to the plastic lens. Now just pull the lens away from the camera to remove the old lens. This may require a small amount of force.
+	[* black] If it does not want to budge, try reheating.