Änderungen an Schritt Nr. 1
Bearbeitet von Trent Chapman –
Bearbeitung genehmigt von Trent Chapman
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* icon_note] We are working on the right speaker, but the process |
|---|---|
| + | [* icon_note] We are working on the right speaker, but the process can be duplicated for both sides. |
| [* black] Use the PH00 screwdriver tool to remove the 10mm?? screw. | |
| [* black] Use the pry tool to begin pulling up the speaker. | |
| [* icon_note] You will not be able to pull up the speaker until you remove the adhesive from the amplifier. | |
| [* black] Wedge the pry tool under the amplifier to remove the adhesive holding it down, then you should be able to pry it out. |