Änderungen an Schritt Nr. 1
Bearbeitet von Chris Monte –
Bearbeitung genehmigt von Chris Monte
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Locate Hard Drive. |
|---|---|
| + | [* red] Locate the Hard Drive. |
| [* orange] Remove the two 3mm screws from Hard Drive with the Phillips #0 head. | |
| - | [* yellow] Disconnect wire attached to the system board by lifting up the tape. |
| - | [* green] Remove tape tab from Hard Drive by lifting the tape up and off of the Hard Drive unit. |
| + | [* yellow] Disconnect the wire attached to the system board by lifting up the tape. |
| + | [* green] Remove the tape tab from the Hard Drive by lifting the tape up and off of the Hard Drive unit. |