Änderungen an Schritt Nr. 3
Bearbeitet von Tayler Blanchard –
Bearbeitung genehmigt von Tayler Blanchard
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Locate the four housing screws located at each corner of the transceiver PC board shield. | |
| - | [* black] To remove the screws from the transceiver PC board shield, use a screwdriver with a T6 Torx screwdriver head to turn screws counter-clockwise (left). |
| + | [* black] To remove the screws from the transceiver PC board shield, use a screwdriver with a T6 Torx screwdriver head to turn the screws counter-clockwise (left). |
| [* black] Repeat for the three remaining screws. | |
| - | [* black] Once all the screws |
| + | [* black] Once you have removed all of the screws , lift the transceiver PC board shield up to remove and replace. |