Änderungen an Schritt Nr. 2
Bearbeitet von Mario Gjyli –
Bearbeitung genehmigt von Mario Gjyli
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Using the Phillips #00 bit remove the 6 screws marked in red, and the three screws marked in yellow. After removing all the screws, disconnect the ribbon cables marked in green. |
|---|---|
| + | [* red] Using the Phillips #00 bit remove the 6 screws.After removing all the screws, disconnect the ribbon cables marked in green. |
| + | [* yellow] Using the Phillips #00 bit remove the 3 screws. |
| + | [* green] After removing all the screws, disconnect the ribbon cables. |
| + | [* icon_caution] Some of the ribbon cables are secured with clips, simply pry up the clips before sliding them out of the pin connectors. |