All hard drives running at 100% usage for any program (mostly "system") on new laptop. Hard drives continue to run slowly after being put back in working laptop. Unless it's because of the bios it is a hardware problem not a software one.
[image|1197593]
[image|1197596]
[image|1197594]
[image|1197597]
[image|1197595]
[image|1197592]
[image|1197591]
Larger images from HDD killing laptop and slightly smaller images from Good laptop that has never harmed a HDD
Edit
-
The drive went back to normal after playing some games. Work fine on both laptops too.
+
The drive went back to normal after playing some games. Work fine on both laptops too.
Bought a used laptop and noticed the hardrive was running at 100% in task manager. I got a new hard drive for it but it started running at 100% as well. I then I put in my working HDD from my other laptop and it too started running at 100% and continued running at 100% when I put it back into my good laptop. When trying to put the HDD back in the new laptop, the sata connector bent out of place. Could that be my problem and could it be solved with replacing the connector?
+
All hard drives running at 100% usage for any program (mostly "system") on new laptop. Hard drives continue to run slowly after being put back in working laptop. Unless it's because of the bios it is a hardware problem not a software one.
[image|1197593]
[image|1197596]
[image|1197594]
[image|1197597]
[image|1197595]
[image|1197592]
[image|1197591]
-
Larger images from HDD killing laptop and slightly smaller images from Good laptop that has never harmed a HDD
+
Larger images from HDD killing laptop and slightly smaller images from Good laptop that has never harmed a HDD
Edit
+
The drive went back to normal after playing some games. Work fine on both laptops too.
Bought a used laptop and noticed the hardrive was running at 100% in task manager. I got a new hard drive for it but it started running at 100% as well. I then I put in my working HDD from my other laptop and it too started running at 100% and continued running at 100% when I put it back into my good laptop. When trying to put the HDD back in the new laptop, the sata connector bent out of place. Could that be my problem and could it be solved with replacing the connector?
+
Bought a used laptop and noticed the hardrive was running at 100% in task manager. I got a new hard drive for it but it started running at 100% as well. I then I put in my working HDD from my other laptop and it too started running at 100% and continued running at 100% when I put it back into my good laptop. When trying to put the HDD back in the new laptop, the sata connector bent out of place. Could that be my problem and could it be solved with replacing the connector?
Bought a used laptop and noticed the hardrive was running at 100% in task manager. I got a new hard drive for it but it started running at 100% as well. I then I put in my working HDD from my other laptop and it too started running at 100% and continued running at 100% when I put it back into my good laptop. When trying to put the HDD back in the new laptop, the sata connector bent out of place. Could that be my problem and could it be solved with replacing the connector?
+
Bought a used laptop and noticed the hardrive was running at 100% in task manager. I got a new hard drive for it but it started running at 100% as well. I then I put in my working HDD from my other laptop and it too started running at 100% and continued running at 100% when I put it back into my good laptop. When trying to put the HDD back in the new laptop, the sata connector bent out of place. Could that be my problem and could it be solved with replacing the connector?
Bought a used laptop and noticed the hardrive was running at 100% in task manager. I got a new hard drive for it but it started running at 100% as well. I then I put in my working HDD from my other laptop and it too started running at 100% and continued running at 100% when I put it back into my good laptop. When trying to put the HDD back in the new laptop, the sata connector bent out of place. Could that be my problem and could it be solved with replacing the connector?