It doesn't look like a regular fuse, and they differ also.
It should say j11 on or around the coupling, usually it is either a 2 pin cream coloured flat fuse (might be black now) and it is plugged into a 2 pin connector on the Kinect 2.0...at j11
Or sometimes it's simply a 2 pin Fuse/coupling soldered directly onto the board which can make it a little fiddly to find but usually the latter
I will try to show you my rough first fix before I changed the test bypass and neatened everything up, but hopefully you will get the jist.
You should find it here
[image|1841109]
This is how it looked on my K2.0 board
[image|1841113]
[image|1841111]
And this was the rough bypass test during my fault finding.
And it worked! It was my Eureka moment! Lol
[image|1841112]
I hope this helps.
All the best.