Original-Beitrag von: Alex Herberstein

Original-Beitrag von::

These pogo pins don't hold tension very well and don't hold on very well.[br]
A temporary fix would be to bend the pogo pins out a bit with a screwdriver. [br]
[br]
Best solution would be one of the following:[br]
[br]
Solder brass shims on to the contact points to narrow the gap between the pins (Can't just use solder as it is too soft and the pins just push through)[br]
Solder wires directly to the pins[br]
Replace the earphones with a headset

Status:

open