Here's the [document|32647|tech sheet] for the washer that may help.
-
Check if the diagnostic LED light on the control board is ''flashing'' or is on or is off - see the image on p.2 ''Diagnostic Led – Main Control (ACU)'' to find its location on the board.
+
Check if the diagnostic LED light on the control board is ''flashing'' ***or*** if it is ''on'' or is ''off'' - see the image on p.2 ''Diagnostic Led – Main Control (ACU)'' to find its location on the board.
If it is either ON or OFF (not flashing) then go to Test #1: Main Control (ACU) and follow the steps to check if the power cord and the control board are OK or not.
If the power cord is faulty search online for ''W11112935'' to find suppliers that suit you best.
If the control board is faulty search online for ''W11413659'' (or ''W11470214'' - supersedes previous part number) to find suppliers that suit you best.
''***Be safety aware*** when testing the control board as there's ***exposed potentially lethal AC voltage*** on the board''
Here's the [document|32647|tech sheet] for the washer that may help.
Check if the diagnostic LED light on the control board is ''flashing'' or is on or is off - see the image on p.2 ''Diagnostic Led – Main Control (ACU)'' to find its location on the board.
If it is either ON or OFF (not flashing) then go to Test #1: Main Control (ACU) and follow the steps to check if the power cord and the control board are OK or not.
-
If the control board is faulty search online for W11413659 (or W11470214 - supersedes previous part number) to find suppliers that suit you best.
+
If the power cord is faulty search online for ''W11112935'' to find suppliers that suit you best.
+
+
If the control board is faulty search online for ''W11413659'' (or ''W11470214'' - supersedes previous part number) to find suppliers that suit you best.
''***Be safety aware*** when testing the control board as there's ***exposed potentially lethal AC voltage*** on the board''
Here's the [document|32647|tech sheet] for the washer that may help.
Check if the diagnostic LED light on the control board is ''flashing'' or is on or is off - see the image on p.2 ''Diagnostic Led – Main Control (ACU)'' to find its location on the board.
-
If it is either ON or OFF (not flashing) then go to Test #1: Main Control (ACU) and follow the steps to check if the control board is OK or not.
+
If it is either ON or OFF (not flashing) then go to Test #1: Main Control (ACU) and follow the steps to check if the power cord and the control board are OK or not.
If the control board is faulty search online for W11413659 (or W11470214 - supersedes previous part number) to find suppliers that suit you best.
''***Be safety aware*** when testing the control board as there's ***exposed potentially lethal AC voltage*** on the board''
Hi @macyekuhn
Here's the [document|32647|tech sheet] for the washer that may help.
Check if the diagnostic LED light on the control board is ''flashing'' or is on or is off - see the image on p.2 ''Diagnostic Led – Main Control (ACU)'' to find its location on the board.
If it is either ON or OFF (not flashing) then go to Test #1: Main Control (ACU) and follow the steps to check if the control board is OK or not.
If the control board is faulty search online for W11413659 (or W11470214 - supersedes previous part number) to find suppliers that suit you best.
''***Be safety aware*** when testing the control board as there's ***exposed potentially lethal AC voltage*** on the board''