Prepare pen and paper to remember where you remove the screws from (about 30+something in total, various sizes).

You should be making some rough drawings to figure out where which screw goes, since I don't give reassembly steps.

Put everything aside and read the steps at least once before disassembly the dock!

You are responsible if you break your stuff.

If you order a keyboard, make sure to get one with the metal backplate, since the backplate is glued to the plastic back cover of the keyboard, which in turn is glued to the keyboard frame and keeps the electronics (switches, backlight,...) in place. See last step for pictures.

I am uploading a video, too.