Hi, Replacing the button would probably fix your issue. If your device is under warranty this would be a free replacement. Remember to back up your data by means of iTunes or iCloud before attempting any repair or replacement. The best solution, if this is an option for you, would be to have the device replaced by Apple themselves at an Apple Retail store. If you don't have an Apple Retail store where you live they can do it over the phone if you call Apple at 1-800 APL-CARE (800–275–2273). Good Luck.

Hi, From what I can see it looks like C41 is part of the Data Bus, but according to the information about this board it doesn't look like C41 is used even though it is present. I will link a picture of the schematics and the page I found the info on. Found on page: https://console5.com/wiki/Game_Gear#837-7996_IC_BD_GG_MAIN_EUROPE_.28Twin_ASIC.2... Good Luck.

Hi, If you have access to the device functions you would go to Settings>Back-up & Reset>Factory Data Reset. The link below is the PDF version of the user manual: https://visual-land.com/downloads/android44_manual.pdf

Hi, "Err" usually means an electronic fault within the camera (or lens in rare circumstances). Sometimes that can be as simple as a build up of static charge, and removing and reinstalling the battery, or doing a system reset, will often cure the problem.

Hi, Quick answer is that if you go into an Apple Authorized service center (or into an Apple Retail store) for service that feature of the phone would be maintained. Apple has very strict repair guidelines for Apple Authorized service providers. If you go to a 3rd Party repair shop there would be no guarantee. Here is the website to check for Apple Authorized repair stores in your area: (In case you do not have an Apple Store in your town) https://locate.apple.com

Hi, The error is basically saying that the recovery data that your computer is utilizing to reinstall the OS with is corrupted or is missing files. I've seen this many times with customers that uninstalled certain programs that associate with or utilize .dll (system) files. When my customers removed these programs part of the uninstall process will ask them if they are sure if they want to remove the program and that doing so will also remove whatever .dll (system) file the program is using. I am sure there is more than one solution for this, but what I have done is created a Installation USB using this Microsoft Support page: https://support.microsoft.com/en-us/help/15088/windows-create-installation-media If your machine isn't currently working you would need to use a different computer to do so. Reinstall Windows 8.1 from the media disk you create and it will create a new recovery partition for you in the process. Should fix everything. **Note** Doing it this way means you will have to reinstall your...

Hi, There isn't a lot of options out there for this replacement part. I only found two options actually: 1. purchase (the port only) from eBay and desolder the old port from the existing board and connector and solder the new port on. Link below - http://www.ebay.com/itm/3x-Lot-Micro-USB-Charging-Port-Charger-Part-For-UE-BOOM-Bluetooth-Speaker-USA-/252645271370?_trksid=p2385738.m2548.l42... 2. According to UE you can call their customer service (1-646-454-3200) and order replacement parts directly from the company. They are Mon-Fri: 6am - 6pm (PST). Good Luck.

Hi, Check your "Media Type" setting in printer preferences. If a higher quality paper type is selected then the "Draft" option may not be available. This page talks about OS X printer settings: https://files.support.epson.com/docid/cp... Good Luck.

I am not too familiar with your tablet, however, I have had this issue on my iPad before. I finally found out that the app was the issue and had to delete the app and re-download it. You might give that a try and see if it corrects the issue.

Hi, I have done a lot of this particular repair. The 000 Phillips usually does the trick, however, in some instances where my customer has had their screen previously replaced by another repair shop sometimes I run into issues where that repair shop put different screws in. I don't know if this is due to lack of screw management or if it is that repair shops personal choice. If it were the right screw you wouldn't have any trouble with it being too tight as the screws are too short to screw in too far to avoid damage to the front of the display. Unfortunately, without knowing for sure I would guess that the issue is that incorrect screws are in the device. You might have to try several sized screw bits and hope for one of them to work. Good luck.