Yes as both Sara and premed handle came loose but in my car had stripped it down to change shift indicator light and a heavy cleaning .Btw shift bolt that secure handle are 3.65 each ,I lost metal rod at top somewhere along the way and found key will not come out of ignition either unless battery is disconnected, also found that after unbolting the 12mm 4 zinc bolts that hold base to car it released out ,going to dealer later on to find where it needs to set to release ,cause has anti theft and is in switch on left side of shifter .My 94 had a dead ignition spot where it would not let keyless start engage unless key was in ignition then and only then it would engage ,it was a faulty spring in it ! From being worn and a fresh dealer key used that caused it ,as opposed to worn og fyi!But it was just key wasn't black transponder key !