Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese beinhalten.
Schritt 7 übersetzen
Schritt 7
-
Remove the five ribbon connectors along the bottom of the assembly using either needle nose tweezers or a plastic opening tool to flip the small flaps to the "up" position.
-
Use a nylon spudger to pull each ribbon connector out of its connection using the hole in the center of the ribbon.
| - | [* black] Now to remove all of the bottom ribbon connectors. |
|---|---|
| + | [* red] Remove the five ribbon connectors along the bottom of the assembly using either needle nose [product|IF145-020|tweezers] or a plastic opening tool to flip the small flaps to the "up" position. |
| + | [* black] Use a nylon spudger to pull each ribbon connector out of its connection using the hole in the center of the ribbon. |
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.