Zum Hauptinhalt wechseln

Cambiar la batería de un JBL Flip 4

Englisch
Spanisch

Schritt 3 übersetzen

Schritt 3
JBL Flip 4 Battery Replacement: Schritt 0, Bild 1 von 3 JBL Flip 4 Battery Replacement: Schritt 0, Bild 2 von 3 JBL Flip 4 Battery Replacement: Schritt 0, Bild 3 von 3
  • Remove the large white plug that connects the wires from the battery to the main board using your hands.

  • Pull the battery out with your hands.

  • If the battery is swollen, you might not be able to pull it out with your hands, you might just rip the cables+charging board out.

  • In this case, follow this additional guide for pushing out the battery. Summarized: You can try to remove the other radiator, unscrew the charging port and gently pull it out just a bit so a large screwdriver's end - without its bits - can fit in and push out the battery from this side.

  • The port might be hot glued and under the tapes there are very small normal and ribbon cables, so be careful not to cut or rip them.

Quita el conector blanco y grande que une los cables de la batería con la placa principal, con la ayuda de tus manos.

Quita la batería del dispositivo tirando de ella con las manos.

Si la batería está hinchada, es posible que no puedas sacarla con las manos, es posible que simplemente rompas los cables y la placa de carga.

En este caso, sigue esta guía adicional para sacar la batería. En resumen: puedes intentar quitar el otro radiador, desatornillar el puerto de carga y sacarlo con cuidado un poco para que la punta de un destornillador grande (sin las puntas) entre y saque la batería por este lado.

El puerto puede estar pegado en caliente y debajo de las cintas hay cables normales y de cinta muy pequeños, así que ten cuidado de no cortarlos o rasgarlos.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.