Zum Hauptinhalt wechseln

第4世代 iPod Nanoのガラスパネルの 交換

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 6 Anleitungen, die diese beinhalten.

Englisch
Japanisch

Schritt 1 übersetzen

Schritt 1
iPod Nano 4th Generation Glass Panel Replacement: Schritt 0, Bild 1 von 2 iPod Nano 4th Generation Glass Panel Replacement: Schritt 0, Bild 2 von 2
  • Insert the edge of an iPod opening tool into the gap between the outer case and the top bezel.

  • Pry the top bezel off the adhesive securing it to the display retainer.

  • At this point the hold switch slider is free and may fall. Be careful not to lose it.

iPod用開口ツールの端を、外装ケースと上部のベゼルの隙間に挿入します。

上部のベゼルをディスプレイリテーナに固定している接着剤からはがします。

この時点で、ホールドスイッチスライダは完全に外れており、落下する可能性があります。注意して作業を進めてください。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.