Zum Hauptinhalt wechseln

Retina MacBook 2015 下部ケースアセンブリの開口

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 12 Anleitungen, die diese beinhalten.

Englisch
Japanisch
Schritt 11
Retina MacBook 2015 Opening Lower Case Assembly: Schritt 0, Bild 1 von 2 Retina MacBook 2015 Opening Lower Case Assembly: Schritt 0, Bild 2 von 2
  • Carefully turn the MacBook over, so that the lower case lays flat.

  • Raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.

  • Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.

  • It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

下部ケースを水平状態に置くために、MacBookを慎重に裏返します。

上部ケース/ディスプレイアセンブリを約90度の角度まで持ち上げ、 手で固定する必要がないように、安定した頑丈な衝立に立てかけます。

上部ケースを固定するためトラックパッドの近くにテープを貼り、不用意な動きを防ぎます。

MacBookを完全に開き、両側を水平に配置することもできます。しかし、この状態の場合、フレックスケーブルが損傷する可能性があるため、お勧めしません。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.