Zum Hauptinhalt wechseln

SodaStream Source Demontage der inneren Bauteile

Hinweis: Du bearbeitest gerade eine grundständige Anleitung, die Teil der Anleitung ist, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 3 Anleitungen, die diese grundständige Anleitung beinhalten.

Englisch
Deutsch

Schritt 1 übersetzen

Schritt 1
SodaStream Source  Internal Disassembly: Schritt 0, Bild 1 von 3 SodaStream Source  Internal Disassembly: Schritt 0, Bild 2 von 3 SodaStream Source  Internal Disassembly: Schritt 0, Bild 3 von 3
  • Push the brass bar, located in the top of the device, out of the carbonating block.

  • You can use the end of your screwdriver to push this piece out.

Schiebe die Messingstange, die sich am oberen Ende des Geräts befindet, heraus aus dem "Sprudel-Block".

Du kannst die Spitze eines Schraubendrehers benutzen, um das Teil auszudrücken.

-[* red] Push the gold bar, located in the top of the device, out of the carbonating block.
+[* red] Push the brass bar, located in the top of the device, out of the carbonating block.
[* icon_note] You can use the end of your screwdriver to push this piece out.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.