Honeywell HY-204 Rotation Motor Replacement
Einleitung
Zu Schritt 1 der AnleitungThis guide will walk you through the steps to remove your rotation motor. Though disassembly is simple, it is a difficult process to put back together because you have to solder wires or use a wire connector to reattach a new rotation motor.
Was du brauchst
Ersatzteile
Werkzeuge
Mehr anzeigen …
-
-
Lay fan on the ground and use your fingers peel the three feet off the bottom of the fan.
-
-
-
-
Move the rotation motor left and right to reveal the screw connecting it to the fan.
-
Remove the 18mm screw from the side of the motor using the Phillips #0 Screwdriver.
-
-
-
Using the wire cutters, severe the wires connecting the rotation motor to the fan.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 10-40, Amido Fall 2014 Mitglied von Cal Poly, Team 10-40, Amido Fall 2014
CPSU-AMIDO-F14S10G40
3 Mitglieder
7 Anleitungen geschrieben
2 Kommentare
It seems that these instructions are on “How to eeplacr the oscillation motor". But they neglect the requirement to have a replacement motor or how/where to get the replacement motor. Otherwise the steps seem clear.
