PowerLead Puto PLD003 Zoom Button Replacement
Einleitung
Zu Schritt 1 der AnleitungThis guide shows how to remove the side panel from the camera, how to remove the back panel, and how to replace the zoom button.
Was du brauchst
Werkzeuge
-
-
Rotate the camera so that the underside is facing up.
-
Remove the four 5 mm Phillips #1 screws.
-
-
-
Place the camera on a flat surface, with its underside facing you.
-
Gently pull up on the side panel to remove it from the camera.
-
-
-
Remove the 4 mm Phillips #1 screws holding the weight.
-
Remove the weight.
-
-
-
-
Carefully apply pressure away from the camera to the screen to detach it from the body.
-
The white cord should still be connected to the body.
-
-
-
Lift the circuit board out of the plastic casing.
-
Gently pull on the zoom button to remove it from the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Eastern Washington University, Team 1-2, Giguere Spring 2016 Mitglied von Eastern Washington University, Team 1-2, Giguere Spring 2016
EWU-GIGUERE-S16S1G2
4 Mitglieder
7 Anleitungen geschrieben
