Zum Hauptinhalt wechseln

Frontpaneleinheit ausbauen

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 15 Anleitungen, die diese beinhalten.

Englisch
Deutsch
Schritt 5
Front Panel Assembly Removal, Remove the buffer block: Schritt 0, Bild 1 von 3 Front Panel Assembly Removal, Remove the buffer block: Schritt 0, Bild 2 von 3 Front Panel Assembly Removal, Remove the buffer block: Schritt 0, Bild 3 von 3
Remove the buffer block
  • Use the flat end of a spudger to pry up the buffer block near the bottom-right corner of the iPad.

  • Take care not to puncture or tear the home button ribbon cable.

  • Remove the buffer block.

Benutze das flache Ende eines Spudgers, um den Puffer-Block in der Nähe der unteren rechten Ecke der iPads zu entfernen.

Achte darauf, dass du das Home Button Flachbandkabel dabei nicht beschädigst.

Entferne den Puffer-Block.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.