Änderungen an Schritt Nr. 2
Bearbeitet von Philip Le Riche –
Bearbeitung genehmigt von Philip Le Riche
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [* black] Using a spudger, release the front panel from its clips on the front and both sides. If you cannot easily release it, it will be because you have missed one of the screws on the bottom. |
|---|---|
| + | [* black] Once released, gently lift the front panel, noting that it's still attached to the motherboard by a thin ribbon leading to the touchpad. Angle it forwards and lay it don flat, so that you can release the locking tab on the touchpad ribbon and so disconnect the ribbon. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt