Änderungen an Schritt Nr. 9
Bearbeitet von Jeff Suovanen –
Bearbeitung genehmigt von Jeff Suovanen
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [title] RAM Module #2 |
|---|---|
| + | [* black] Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module. |
| + | [* icon_note] When released, the RAM module will pop up at a slight angle. |
| + | [* black] Lift the RAM module to an angle of about 30 degrees and slide it out. |
| + | [* icon_caution] When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge. |
| + | [* icon_reminder] To install a new RAM module, slide it in place at about the same angle until it is snug, and then swing it downward until the two clips snap into place. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt