Can't get screws out

Question

New Nintendo 3DS

Nintendo’s first major revision of the 3DS released to Japan in October of 2014 and to North America in September of 2015. The 2015 3DS introduces improved 3D capabilities, a C-Stick, new internal amiibo support, and a new set of trigger buttons.

20 Fragen Alle anzeigen | 3 Ersatzteile Store

[deleted]

Rep: 1

1

Veröffentlicht: 20. Mär 2023

Einstellungen

Can't get screws out

Trying to open my N3DS to replace the circle pad, but these two screws just don't move. I've looked up other versions of this question but sometimes they link to suggestions that include drilling which sounds like an extremely bad idea. I've heard about the screw extractor set but I want to know if these are even recoverable considering the warning on the one sold by ifixit.

Edit: A link showing the screw I could get out to the ones I can't.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

2 Kommentare:

Can you post a picture of fthe screwheads fir the screws in question (so we can see how stripped they are)? Bilder zu einer vorhandenen Frage hinzufügen

21. Mär 2023 von Andrew S

Yeah, added a new link comparing the screws I can get out and the screws I'm concerned about.

23. Mär 2023 von [deleted]

Einen Kommentar hinzufügen

2 Antworten

Can you post a picture of fthe screwheads fir the screws in question (so we can see how stripped they are)? Bilder zu einer vorhandenen Frage hinzufügen — Andrew S
Yeah, added a new link comparing the screws I can get out and the screws I'm concerned about. — [deleted]

darth mango @darthmango Rep: 3 Tsd. 18 7 14 · Answer 1 · 2023-03-21T06:41:47-07:00

darth mango @darthmango

Rep: 3 Tsd.

18

7

14

Veröffentlicht: 21. Mär 2023

Einstellungen

Drilling them out is usually a last resort. Try using a piece of cloth between your screws and screwdriver (make sure the bit doesn't slip through the threads). Turn as carefully as you can, and stop if you ever feel like you're making it worse

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

Einen Kommentar hinzufügen

Andrew S @andrewsawesome Rep: 15,2 Tsd. 27 18 29 · Answer 2 · 2023-03-24T07:30:48-07:00

Andrew S @andrewsawesome

Rep: 15,2 Tsd.

27

18

29

Veröffentlicht: 24. Mär 2023

Einstellungen

These screws are pretty stripped. When I had stripped screws, I used a Dremel blade to cut a slit into the screws, but that won't work for this device. I think the precision screw extractor set should work for this screw.