Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: oldturkey03

Original-Beitrag von::

Brett Turner, U205 on the image is the accelerometer.
[image|238084|align=center]
[image|238083|align=center]
Hope this helps, good luck.
== Additional Info ==
+
Abnormal Acceleration,Gyro Sensor part
+
Check the Voltage
C238 = 2.8V
C239 = 2.8V
C237 = 1.8V
If No then Resolder U205 or REflow U500
If Yes
Check the Voltage
R460 = 1.8V
R461 = 1.8V
If No Resolder U500 or Reflow UCP400
-If Yes
+If Yes
Acceleration,Gyro Sensor operate correctly?
+
If No REflow or Replace U205 using a Heatgun or change Logic board.
+The resistors and capacitors are marked on the second image, including the schematic of where to measure. Again, hope this helps.

Status:

open

Bearbeitet von: oldturkey03

Original-Beitrag von::

Brett Turner, U205 on the image is the accelerometer.
[image|238084|align=center]
[image|238083|align=center]
Hope this helps, good luck.
+
+== Additional Info ==
+Abnormal Acceleration,Gyro Sensor part
+Check the Voltage
+C238 = 2.8V
+C239 = 2.8V
+C237 = 1.8V
+If No then Resolder U205 or REflow U500
+If Yes
+Check the Voltage
+R460 = 1.8V
+R461 = 1.8V
+If No Resolder U500 or Reflow UCP400
+If Yes
+Acceleration,Gyro Sensor operate correctly?
+If No REflow or Replace U205 using a Heatgun or change Logic board.

Status:

open

Bearbeitet von: oldturkey03

Original-Beitrag von::

Brett Turner, U205 on the image is the accelerometer.
-[image|238084|align=left]
+[image|238084|align=center]
-[image|238083|align=left]
+[image|238083|align=center]
Hope this helps, good luck.

Status:

open

Original-Beitrag von: oldturkey03

Original-Beitrag von::

Brett Turner, U205 on the image is the accelerometer.

[image|238084|align=left]

[image|238083|align=left]

Hope this helps, good luck.

Status:

open