@xchdav I would definitely start by cleaning the motherboard and reapplying some thermal paste. After you will need to check the hard drive (try to change the boot order and try a bootable USB) as well as the RAM. I would remove the RAM and clean the contacts gently with a pencil eraser, then reseat. Make sure that you have your BIOS updated as well. Use the [document|40901]
Anything after that could be related to the motherboard and would require further troubleshooting.
Translation
@xchdav Ich würde definitiv damit anfangen, das Motherboard zu reinigen und etwas Wärmeleitpaste neu aufzutragen. Danach musst du die Festplatte (versuche, die Bootreihenfolge zu ändern und einen bootfähigen USB-Stick zu verwenden) sowie den Arbeitsspeicher überprüfen. Ich würde den Arbeitsspeicher entfernen und die Kontakte vorsichtig mit einem Radiergummi reinigen und dann wieder einsetzen. Stelle sicher, dass du auch dein BIOS aktualisiert hast. Verwende das [document|40901]
Alles, was danach kommt, könnte mit dem Motherboard zusammenhängen und würde eine weitere Fehlersuche erfordern.