Diese Person hat ihr Profil noch nicht ausgefüllt.
Fragen
Hi, My iPhone XS Max screen is malfunctioning after I dropped it unintentionally on the floor. Is it possible that the...
Mehr erfahrenMy laptop was falling down at 2 meters height and suddenly the screen holder was broken but the unit is still working. The...
Mehr erfahrenMy PC was too old. I would like to upgrade it from windows XP to windows 8. What should I do? Please help me.
Mehr erfahrenForum
Check your battery replaced if it matches to your original battery spec. Based on you problem statement, your newly replaced battery has a lower current to turn-on your device.
Mehr erfahren(1) Check first the resistance of your load(Appliances) and solve for the current(I) using ohm's law. (2) If you already calculate your load current, check your GFCI current rating/setting if it suits to your load current. If the current rating/setting of your GFCI is lower than calculated load current, adjust(higher) your GFCI current setting. And if your GFCI has fixed current rating, replaced it with a higher current rating. (3) Note: GFCI will also trip-off if your load(Appliance) resistance is lower, since starting current will spike. If you have more than 1 load, it must be turned-on individually.
Mehr erfahrenCheck first your power supply if it still working. (1) Remove connecting terminal of your battery and check the positive and negative terminal wires if there's still voltage output. I yes, may your battery was already damaged (Replace it). If no voltage output or has a lower voltage output, replace your power supply battery charger. (2) If you want to use it without the battery anymore, you can use a power supply that has the same voltage/current rating to your charger/battery. Connect the power supply directly to the battery terminals after removing the battery. I hope it can help.
Mehr erfahrenHi sender, Have you tried to replaced your VGA? You may try to check also the VGA female connector in your PC. It may had worn out wires.
Mehr erfahrenTry to search the model of your unit here in ifixit, then find the battery. It will shows all parts needed and also the price. It really helps.
Mehr erfahrenRemove the cover of the TV and find the ribbon wire that supplies the LCD of your screen. Clean it with a contact cleaner for possible lose contact. Then try to turn on the TV. Most cases lost contact is the cause of that line. After checking for possible lose contact but the problem still appear, that is more likely the T-CON Board was partially defective. You can replace the t-con board whole assembly. That is available now in the market.
Mehr erfahrenCheck your power supply output with a volt meter. If the power supply works properly and the output voltage fits to your unit requirement, then your unit may have problem. Just send it to the service center of that unit.
Mehr erfahrenTry to replace with a new front camera. Maybe the camera was damaged during the replacement of battery. Sometimes, it happens that the battery supply input was touched to the other part of your phone and it happens that it goes to your camera and damage it. I have tried it to my other costumer with same problem.
Mehr erfahrenThe battery connector was the with that problem. But it is not easy to replace the battery connector, since it was connected/attached to the mother board. You can replace the mother board assembly but quite expensive. It’s better to buy a new one than replacing the mother board. Since the price is almost the same with a new one.
Mehr erfahrenJust reset your phone with the default setting and reboot it. It will help you to remove all your apps that may have viruses. But before doing it, transfer your important files with another device.
Mehr erfahrenjames malines
@mccjong
107
Reputation
10
Lösungen
0
Anleitungen
Mitglied seit 05/21/19
Stimmen
3
0