Von Studierenden verfasstes Wiki
Ein tolles Team von Studierenden aus unserem Bildungsprogramm hat dieses Wiki erstellt.
Clippers won't turn on
Clippers won’t turn on no matter what or they work intermittently.
Switch is turned on/device plugged in
Make sure the power switch is completely rotated to the on position and that the switch is not too loose. Make sure that the power cord is securely plugged into an electrical outlet (with appropriate voltage), if the clippers fail to operate.
Motor is dead
It is possible that the motor will not move because it is just jammed or needs cleaning and lubrication. The motor may also require replacement if this does not solve the problem.
Cord is frayed
Examine the cord, including the plug, for signs of wear. If it is frayed and then be sure to replace the cord. Do not store the hair clipper with the power cord wrapped around the casing as this can damage the cord.
Clippers not cutting close enough
Clippers do not cut hair close or snags hair in stead of cutting it.
Clippers have missing or defective parts
Clippers are leaving gaps of differing hair lengths when they pass over the scalp. It is possible that your guards or blades may be missing some parts. Carefully inspect your guards or blades to see if they are missing any teeth. Another cause for these cut gaps could be interference from foreign objects. Your blades may not be adjusted properly or you may have dull or rusted blades. If so, replace the missing or defective parts.
Device vibrates excessively
Clippers are vibrating more than usual and are very loud.
Missing or defective parts
Missing parts such as screws or a cracked casing can be the cause of your clippers malfunction.
Improper adjustment
The clippers may be improperly adjusted due to normal wear and tear or from being dropped enough times.
Clippers running slow
Clippers may be running slower than usual and taking several passes to cut hair.
Cord may be malfunctioning
Inspect the cords connections to see if there are internal wiring issues that could limit clipper power, such as arcing or a wire break.
On/Off switch may be malfunctioning.
Inspect the switch mechanism for signs of pitting and arching. If it's not clean and doesn't make contact then the correct amount of current will not flow to the motor.
Motor may require replacement.
The motor may be beyond repair and need to be replaced. Hopefully this is not the case because the Andis clippers usually don't have a significant manufacturer's warranty and the price of the motor is fairly hefty.
Team
USF Tampa, Team 1-34, Donnelly Fall 2014 Mitglied von USF Tampa, Team 1-34, Donnelly Fall 2014
USFT-DONNELLY-F14S1G34
1 Mitglied
2 Anleitungen geschrieben
30 Kommentare
Hello, I have an andis envy adjustable blade clipper. I have used it only a few times(maybe five). The last time I tried to use it, it buzzed very loud and the blades were not moving to cut. Not sure what to do. Help please!
acerocke - Antwort
They are probably stuck from not being used
Carlos-mega Robles -
Have you fixed that, I got gift of Andis Pro complete pack once I open it the big machine motor is working but blade is not moving neither it’s cutting hair can anybody suggest what I have to to.
Mazhar Khatri -
Red wire came out the coil
Tyrone - Antwort
How do I fix it
Tyrone - Antwort
I dropped a pair of Styliner ii trimmers from countertop height and the motor stopped vibrating effectively, it only drew the armature to the field assembly, never repelling it to create the oscillations. It still vibrated but it was more quivering and chattering if I pulled the armature away. Something broke in the frequency or I'm not sure what exactly. I'll be ordering a replacement field assembly and see how things go and report back here. Not sure what could have failed in the unit that would cause the field to set one polarity.
jxramos - Antwort
Turns out not to have been the field assembly but the anchor screw which somehow fractured previously and was shortened by the previous owner. I replaced and clamped down and set all the screws I could down with loctite made, adjusted the power screw and I was back in business.
jxramos -
I just bought my andis gtx outliner and I can’t get it to run. Other than plugging it in and turning the switch is there anything I have to do so it turns on?
estrada.fidel23 - Antwort
Obviously its in need of repair.
Carlos-mega Robles -
I brought andia t outliner. The first one didn't cut even the blade was moving. My dad brought it back and exchanged it . The second one did the same so I sent it to the company. When I got it back it would cut sometimes. But still not like it should I have changed the blade now and it works ok sometimes but still not all the time. Any thing else I can do? I have spent alot of money and idk what else to try. A coworker loved hers she brought yrs ago.
BellaFrice - Antwort
My andis clippers working but not cutting blades moving ok and cleaned them dont no what to do not a year old
neilmckinnon1 -
Hi I have a andis t outline an it was cutting good but now it doesn't want to cut what happen everything works motor I got it maybe 6 months ago what can I do who can fix it for me?
Jose Lopez - Antwort
The light on my Andis cordless T liners is lighting up red? Why is this??
lainey laird - Antwort
I'm guessing it needs charged maybe.
Julie M -
Why would my andis profoil stop working and not charge after 3weeks of use?
Jason kessler - Antwort
Andis cordless Tliner won’t charge. Light on but won’t turn on. Seem battery not charging
Robin Emmett - Antwort
Andis mbg2 buzzed 1 dog and half of another and they do not cut anymore brand new
teresa c - Antwort
Same just happened to me and this is only my second time clipping my Portuguese Water Dog. She’s 3/4 groomed and the clipper won’t start back up. It’s not hot to the touch. Andis MBG2 with an Andis 30 blade . Not happy!
Joan
Joan Durkee -
Andis t liner clippers were left running and cut off overheating. Now they will not cut back on. Looking for recommendations on possible solutions. Thanks in advance
michaelcyoung1 - Antwort
I have a brand new Andis MBG2 dog clipper, and it stopped working after about an hour. Cleaned the blade, checked the plug. Dead. Please help!
Joan Durkee - Antwort
I put a new blade on my Andis outlined in now they not cutting they come in but not cutting
annette grissett - Antwort
I have 2 pairs of Andis cordless t outliners and neither one will work unless the cord is attached. Do anyone know what can be the issue?
Dennis Davenport - Antwort
My andis TS-01 green charging light not working. Has anyone had this happen?
Thomas Viola - Antwort
Bought a cordless T-Outliner overseas but the device will not sit properly in the charger(keeps popping out) and by that it fails to charge. What can be done to this device? If I’m going to have to replace it at my cost, I might as well try another brand.
Guy Phaux - Antwort
I have The Andis ProClip Excel 5 speed clippers. They are virtually brand new. I bought them and shortly after, I lost my dog to illness and packed them away. I now have another dog added to my family and broke out the clippers. As I said, they are brand new (not even unpacked from the box) but bought over 2 yrs ago, so out of warranty I'm sure. When I plugged them in, I noted this intermittent vibration - as if the clipper was trying to turn itself on/off. I checked the switches and after plugging/unplugging them several times, pushing in the stop button I finally got that intermittent issue to stop, but they would still not turn on. Finally after playing back and forth with the switches (on off and speed) they finally turned on. I was able to use them for about five minutes and turned them off to reposition my dog and had to go through the same thing again. What could cause this issue and where can I take them to be repaired. I paid $240. for them so would really like to be able to use them.
Ruth Woody - Antwort
I just bought the Andis beard trimmer and when I turned it on it runs fine it works fine but it doesn't cut doesn't even cut the hair off my arms what's up with that
James Gohl - Antwort
I'd like to know also because mine does the same off and on.
Julie M -
Brand New slimline trimmer won't always cut, especially not fine, young children's hair. Blades look even and not missing teeth. Can't get a hold of customer service. Can't return to where I bought it. What to do?
Julie M - Antwort
Hi, I have an Andis DBLC-2 which has always been excellent but then began to stop and start and then stopped completely. Can you tell me what the problem is please
Christine Jenkins - Antwort
Hello, I have a brand new andis t-liner trimmer and I need assistance on how to stop the loud noise
Thobani Nhlapo - Antwort