Schritt 3 übersetzen
Schritt 3
-
Use an opening tool to pry the fingerprint sensor off of the gasket.
-
Remove the colored plastic liner on the replacement gasket to expose the adhesive.
-
Carefully align and lay the fingerprint sensor onto the sticky side of the gasket.
-
Once aligned, press down firmly with your finger to bond the adhesive.
| - | [* icon_note] If you |
|---|---|
| + | [* icon_note] If you're only replacing the fingerprint sensor and not the [product|IF355-047-1|fingerprint sensor gasket|new_window=true], ***skip this step***. |
| [* black] Use an opening tool to pry the fingerprint sensor off of the gasket. | |
| [* black] Remove the colored plastic liner on the replacement gasket to expose the adhesive. | |
| [* black] Carefully align and lay the fingerprint sensor onto the sticky side of the gasket. | |
| [* black] Once aligned, press down firmly with your finger to bond the adhesive. |
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.