Einleitung
Hello, this guide will help you replace the memory in a HP EliteBook 8560w.
Keep in mind that this model has two pairs of memory: one pair below the back panel and another below the keyboard. We’ll describe the steps for both.
Usually, a computer’s memory needs to be replaced when a message of “not enough memory” pops up in your screen. However, check out our troubleshooting page to see if your problem falls into a different category.
Please follow instructions as they appear.
Was du brauchst
-
-
Slide the lock all the way to the right and remove the M2.5x8mm screw with a Philips #0 screwdriver.
-
-
-
Slide the panel towards you and lift it up to open and access the back of the computer.
-
-
-
-
Carefully lift keyboard to reveal connection strips.
-
Unlock the latch holding the connection strips.
-
Pull out the connection strips from the motherboard.
-
-
-
Pull both metal parts away from memory pair. Lift memory pair and it will come out.
-
-
-
Flip device upside down. Pull metal bars away from the memory. Lift the memory up and it will pop out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Embry-Riddle Aeronautical University, Team S16-G7, Branham Spring 2020 Mitglied von Embry-Riddle Aeronautical University, Team S16-G7, Branham Spring 2020
ERAU-BRANHAM-S20S16G7
3 Mitglieder
6 Anleitungen geschrieben
