Toptro TR23 Case Replacement

Zuletzt aktualisiert am December 30, 2024

2 Minuten

Leicht

Einleitung

Use this guide to replace the case on your Toptro TR23.

Werkzeuge

Set the projector on its side so the the front is facing to your left.
Insert an opening tool into the seam between the black chassis and the silver case.
Pry around the perimeter until the case fully releases.
When removing the cover, be careful as there is an internal connector attached to the lid and the projectors motherboard. You’ll have to carefully detach that before fully removing the projector case.
Remove the case.

Abschluss

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.