Seite 1 von 2
Antwort auf „How can I take this apart?”Ok, problem for this case has been found and we have solution! If your Jabra Move headphones not produce sound in left channel in wireless mode - that's bad switching contact in jack connector! For checking if that your problem and solution too you must try to bend and close contact by hand for left channel pin! This is jack have 7 pins (has 3 switching contacts for switching mode with cable/without cable) Connector was found as 3.5mm Female Audio Connector 7 Pin SMD Stereo Headphone Jack or same smd 7 pin earphone socket jack and I found Model number: PJ-382-7P: You can buy it on the links (1) http://www.aliexpress.com/item/10pcs-Phone-Jack-Diameter-3-5mm-7-pin-audio-socket-for-4-poles-earphone-plug-SMD/32648604057.html (2) http://www.aliexpress.com/item/20Pcs-3-5mm-Female-Audio-Connector-7-Pin-SMT-SMD-Stereo-Headphone-Jack-PJ-392/32596449477.html (3) http://www.ebay.com/itm/20Pcs-3-5mm-Female-Audio-Connector-7-Pin-SMT-SMD-Stereo-Headphone-Jack-PJ-392-/121487523477 For the disassemble JABRA MOVE...
Antwort auf „How can I take this apart?”Hi guys! Huray! I was able to disassemble and open headphones! Any questions? But until this time I'm not check pins and cords for resolved my issue with sound: not play left chanel in bluetooth mode, but play all chanels in wired mode. I will try to solve the problem in a few days(at this week)!
Antwort auf „Disassemble the noise cancelation box on Bose QuietComfort 20?”Hi, Chris! I hope you resolved problem and fix your headphones? I was able open this box - housing is opened only by cutting the rubber sheath. But I have cutted cable from headphones side(torn cable) And 6 out of 12 cords I have no idea how where to should be connected( I would be grateful if you could take a picture or paint contacts connected, because I don't have any idea how! Thank you very much! Best wishes!